A&D FG-CWP Series, Быстрый старт

Страница: 7 / 52

7
EN
4.2. Operation Keys
Operation key Description
ON/OFF Key
Shows or hides the display.
SAMPLE Key
Selecting “pcs” as the unit activates individual weight setting mode.
Pressing and holding activates comparator threshold setting mode.
PRINT Key
Outputs the weighing value as data.
MODE Key
Switches the weighing unit.
ZERO Key
Based on the zero point weighed at the time of turning on the display, by
pressing the ZERO key when the weight value is stable within ±2% of the
weighing capacity, the zero point indicator turns on as soon as the display
becomes zero.
TARE Key
The weight of the item on the weighing pan is subtracted as the weight of
a container (tare weight).
5. Setup
1. Take the base unit and the pole out of the
packing box while being careful not to pull the
load cell cable.
2. Remove the weighing pan from the base.
3. Assembling the pole
Temporarily remove the screws attached to the
bottom of the weighing base, and then fasten
the pole and base with the removed screws,
taking care that the load cell cable is not pinched.
Bundle and insert the excess load cell cable into
the pole from the display side.
4. Put the weighing pan on the base unit.
Remove the protective film from the pan before
use
.
2.
1.
3.
Weighing
Pan
Pole
Base Unit
Display Unit
Load Cell Cable