12
7. Switch
・
Set the parameters required for communication using the AD-8552EIP switches (SW-1 to 5).
Caution
・
If the setting is changed, be sure to turn on the power off and on again of AD-8552EIP.
When the power is turned on, the switch status is read and applied to operations.
7-1
How to operate the switch
SW-1, 2
Turn the center arrow to set.
It can be set from 0 to F.
SW-3 to 5
When lever No.1 is moved to the “ON” side, “1” Is set.
7-2
Factory setting
The switch status and settings at the factory setting are as follows. Refer to “7-3. EtherNet/IP switching settings”
“7-4. RS-232C function settings” for the settings that need to be changed.
SW-1
SW-2
SW-3
SW-4
SW-5
Item
Factory setting
value
Switch status at factory setting
IP address (4th octet)
2
SW-1
：
0
SW-2
：
2
RS-232C(CH1) baud rate
2400
SW-3 No1
：
0
SW-3 No2
：
0
RS-232C(CH2) baud rate
2400
SW-3 No3
：
0
SW-3 No4
：
0
RS-232C(CH3) baud rate
2400
SW-4 No1
：
0
SW-4 No2
：
0
RS-232C(CH4) baud rate
2400
SW-4 No3
：
0
SW-4 No4
：
0
No Function
SW-5 No1
：
0
Fixed decimal point function
AUTO
SW-5 No2
：
1
SW-5 No3
：
1
SW-5 No4
：
1
1
1 1
0
0 0
0 0
0
0
0
0
“1”
“0”
No.1 to No.4
Lever
2
0
