A&D AD-8127, Инструкция по эксплуатации

Страница: 21 / 31

19
8-4. Descriptions for the printing mode
Printing method of the printer varies depending on “Printing mode (
PRN MODE
) ” in “8-2.
Items list”.
External key printing mode
（
EXT. KEY
）
Printing is done using weighing device’s keys without making printer key operations.
Set data output settings of the weighing device to output using the keys.
It is also possible to print out data by pressing the key to transmit a weighing value
request command to the weighing device side.
But when connecting using current loop, the commands cannot be transmitted.
Manual printing mode （ MANUAL ）
Printing can be done by pressing the key.
Set data output settings of the weighing device to stream output (Always outputting).
Auto printing mode
（
AUTO
）
Printing is done automatically when data transmitted from the weighing device has
changes of +10 digits or more to zero and is stable.
One digit is the minimum display of the weighing device.
Set data output settings of the weighing device to stream output (Always outputting).
Interval printing mode
（
TIMER
）
Printing is done at each time that was set by this mode. To set the interval time, set
minutes and seconds (mm:dd) after confirming settings of the printing mode to “TIMER” .
To suspend the printing, press the key. To restart the printing, press the key.
Set data output settings of the weighing device to stream output (Always outputting).
Dump printing mode
（
DUMP
）
Data transmitted from the weighing device is printed out without changes
.
Use these
settings for GLP outputs, etc. of the weighing device.
Set data output settings of the weighing device to output using the keys.
Chart printing mode
（
CHART
）
Amount of changes of the weighing values is printed out as scatter plot. Changes of the
weighing values in real time can be confirmed visually.
At the chart printing mode, set digits (2 digits) for chart printing, minutes and seconds of
the interval time (mm:dd) and the printing count after confirming settings of the printing
mode to “TIMER”.
Set data output settings of the weighing device to stream output (Always outputting).
Refer to
“
8-5. Chart printing mode
”
for details.