A&D AD-8118C, Инструкция по эксплуатации, Страница: 34 / 70

32
8. SET_MODE
8-1 Setting the Functions
Function setting procedure
(1) Press [FUNC] to enter the function setting mode.
is displayed.
(2) Using the numerical keys [0] to [9], input the function number to be set, press [END] to confirm it
and display the function data.
(3) Press [*] or [
↓
] to change the function data.
(4) Press [END] to confirm the change and move to the next function data.
(5) Press [PRINT] to print the function list.
(6) Press [SET] to exit the function setting mode.
(7) The function that is to be specified for each channel is indicated by a 4-digit number.
Below is an example of F-10 (Print timing).
The default value is 3333.
Each digit corresponds to a channel, from CH1 through
CH4: [3333 CH1], [3333 CH2], [3333 CH3], [3333 CH4]
Press [*] or [
↓
] to set the function and press [END] to conform the setting. The cursor moves to the
left digit. Set the function for each channel.
*
F-
F- 1 3
2400bps
F-10 333 CH1
Manual
add print
3