AD4412-CW
21
3.4.
Setting the DO/DI
Setting the DO is described using the connection example shown in “1.2. Connecting the external equipment”.
The example below is when an output to the conveyer is set to DO1 and an output to the tower light is set to DO2.
(DO number is a number set by yourself at connection.)
Setting the DO
1. Touch the Product key on the weighing screen to display the product screen. Then, touch the Edit key on the product
screen to display the product edit screen.
Fig. 32
Product screen / Product edit screen
Relay
Conveyer
Tower light
DO2
DO1
B2
B1
AD-4412-CW
Load cell
Photo eye sensor
Fig. 31
Connection example
