8
2.2. Installing the Balance
Install the balance as follows:
1. Refer to “3. PRECAUTIONS” for installing the balance.
2. Refer to "2. UNPACKING THE BALANCE" on page 6, to attach the pan support and the
weighing pan on the weighing unit.
3. Insert the RS-232C cable into the jack located on the rear of the weighing unit.
How to disconnect the cable from the weighing unit
Slide the connector sleeve in the direction of the arrow to unlock and gently pull the connector
out.
Slide the connector sleeve
in the direction of the arrow
Unlocked
Rear of the
weighing unit
RS-232C cable
D-sub 9-pin
A&D's external display
(AD-1691, AD8922A)
Arrow mark
face up
D-sub 9-pin
(PC, PLC)
Sold separately:
AX-KO4472-1000
