AAF PulsePak Prime 2-1H, Инструкция по установке, эксплуатации и обслуживанию

Страница: 28 / 38

28 PulsePak Prime
GDED-IOM-216-B
cartridge wear. On demand pulse units do not change on time pulsing interval, but
instead change the pressure settings.
Because of the lighter dust loads normally encountered with cartridge
collectors and due to the PulsePak filter design, changes in differential pressure may
take days rather than hours to change appreciably.
11.2 Normal operation
The operation of the PulsePak Prime is fully automatic and does not require
constant supervision.
The PulsePak Prime is assumed to be part of a system that will include a fan
and possibly other components, supplied by AAF or other companies.
For successful operation of the PulsePak Prime, it must be ensured that:
1. A suitable, dry compressed air supply to the compressed air manifold(s)
is available and connected to the collector at all times.
2.
The power supply to the pulse controller is on.
3. There is awareness of the status of the dust disposal equipment so that
collected dust is not retained in the hopper(s).
4. The fan is operating at the specified conditions.
A record of operational data should be made and kept up to date. This is
covered in the maintenance section of this manual.