30
SBC-411/411E User Manual
Standard Setup
The AMIBIOS Setup options described in this section are selected
by choosing the Standard icon from the AMIBIOS Setup window
as shown below.
The Standard Setup screen appears:
Primary Master/Slave Disk, Secondary Master/Slave Disk
Select these icons to configure the hard disk type you are using for
the master and the slave. The settings have not been pre-installed.
When you click on an icon, the following parmeters are listed:
Type, LBA/Large Mode, Block Mode, 32 bit Mode, and PIO Mode.
If you are configuring a drive with drive parameters that do not
match drive types 1-46, you can select the User in the Type field.
• Cyl (number of cylinders),
• Hd (number of headers),
• WP (starting write precompensation cylinder),
• Sec (number of sectors),
• Size (drive capacity).
StockCheck.com