Aaeon PCM-8152 3rd Generation, Руководство по установке

Страница: 2 / 6

2. Mark and drill the 4 holes for the motherboard mounting plate. (see picture 1)
Picture 1: Red circles indicate the 4 holes you need to mark on the M15 base to drill and mount the MB mounting plate.
3. Position the ATX power supply so the fan is blowing towards the MB. Make sure the angle bracket is on the bottom of the ATX PS
and mark your two holes. If possible try to reuse at least one of the existing holes to avoid turning the bottom of the M15 into Swiss
cheese. Drill your hole(s) and mount the PS to the bottom of the M15.
4. Make whatever modifications necessary to connect the ATX PS 110VAC cable to the 110VAC connection on the back panel of the
M15.
5. Install the 3x DB9 ribbon cable extenders to the back panel; make sure you mount the blue connectors to the back panel. Plug the
KB, Ethernet, and DB25 holes in the back panel with the supplied plugs and covers.
6. Place the motherboard mounting pan with the MB mounted on it into the M15 and secure with 4x 6-32x1/4 screws.