Aaeon PCM-8152 3rd Generation, Руководство по установке

Страница: 1 / 6

TB230 (Rev1) - PCM-8152 3rd Generation Aaeon motherboard kit Installation
Instructions for M15-6 to M15-10 Consoles
Introduction: This document will provide you with the necessary instructions to install a PCM-8152 motherboard kit in an M15-6
through M15-10 console. Make sure you read the entire document before going to do the install.
Materials List:
PCM-8152 motherboard
PC104 extender board
DVI to TTL daughter board and cable
LCD cable and descrambler shaped bracket
1Gb DDR RAM
80 strand IDE cable
PS2 keyboard & mouse cable
COM port ribbon cable
2 port USB cable
RJ45 Ethernet cable
300W ATX PS w/ brackets and power cable
SSHD w/ Linux software install mounted on bracket
Motherboard mounting plate
5x 6-32x1/2 standoffs with threaded holes on both ends
4x 6-32x1/2 standoffs
4x custom 5mm offset standoffs
4x 6-32x1 standoffs
4x 6-32x1/2 setscrews
3x DB9 ribbon cable extenders
USB connector panel
DB25, KB, & Ethernet blank out covers
Console fan/DP4 power cable
Drive/inverter power cable
60cfm 80mm fan w/ Molex connector
2x L-brackets for mounting 80mm fan
Note: The kit will come with the Aaeon MB and 80mm fan mounted to the mounting plate and the special standoffs mounted onto the
MB.
Procedure:
1. Remove floppy drive bay, CPU7, MB, and power supply from M15.