Aaeon PCM-6896, Руководство пользователя

Страница: 72 / 110

Chapter 3 BIOS setup
63
USB Controller
Select Enabled if your system contains a Universal Serial Bus con-
troller and you have USB peripherals.
USB Keyboard Support
Select Enabled if your system contains a Universal Serial Bus con-
troller and you have a USB keyboard.
USB Mouse Support
Select Enabled if your system contains a Universal Serial Bus con-
troller and you have a USB mouse
Init Display First
This item allows you to active PCI slot or onboard first.
AC97 Audio
The default setting of Auto enables the AC97 audio if it is detected
onboard
IDE HDD Block Mode
Select Enabled only if your hard drives support block mode.
Power ON Function
Select the different manners for powering on the system.
KB Power ON Password
The system will ask for a password, after entering the correct
password the keyboard can then be used.
Hot Key Power On
When the power is on the "standby" mode, you can turn on the
power by pressing Ctrl+F1 or Ctrl+F2, Ctrl+F3...,according to the
choice you make in the BIOS.
Onboard FDC Controller
Select Enabled if your system has a floppy disk controller (FDC)
installed on the system board and you wish to use it. If you install
an add-in FDC or the system has no floppy drive, select Disabled in
this field.