Aaeon MIX-Q370D1, Руководство пользователя

Страница: 42 / 48

3-8
MIX-Q370D1
The following items appear when you set Power Mode to [ATX Type].
Restore AC Power Loss [Last State]
[Last State] The system goes into either off or on state, whatever the system
state was.
[Always On] The system goes into on state after an AC power loss.
[Always Off] The system goes into off state after an AC power loss.
RTC Wake system from S5 [Disabled]
[Disabled] Disables system wake up from S5.
[Fixed Time] The system will wake up at the specified hr::min::sec.
Configuration options: [Disabled] [Enabled] .
[Dynamic Time] The system will wake up at the current time plus a specified
number of minutes.
The following items appear when Fixed Time is enabled.
Wake up day/hour/minute/second [0]
Specify the values for day/hour/minute/second.
The following item appears when Wake System with Dynamic Time is enabled.
Wake up minute increase [1]
Specify the number of minutes added to the current time before waking up
system. Input value range: [1~5]
3.3.10 Digital IO Port Configuration
The items listed in this screen configure Digital IO settings.
DIO Port1~Port4 [Output], DIO Port5~Port8 [Input]
Configuration options: [Input] [Output]
The following item appears only when you set
DIO Port1~8
to [Output].
Output Level [High]
Configuration options: [High] [Low]