Aaeon MIX-Q370D1, Руководство пользователя

Страница: 27 / 48

2-19
Chapter 2: Motherboard information
CAUTION: Do not forget to connect the fan cables to the fan connectors.
Insufficient air flow inside the system may damage the motherboard
components. These are not jumpers! Do not place jumper caps on the fan
connectors!
3. Chassis / CPU fan connectors (4-pin CHA_FAN1, 4-pin CPU_FAN1)
Connect the fan cables to the fan connectors on the motherboard, ensuring
that the black wire of each cable matches the ground pin of the connector.
4. SATA 6.0Gb/s connectors (7-pin SATA6G_1~4)
These connectors connect to Serial ATA 6.0 Gb/s hard disk drives via Serial
ATA 6.0 Gb/s signal cables.
IMPORTANT: When using hot-plug and NCQ, set the SATA Mode Selection
item in the BIOS to [AHCI]. See section
3.3.3 SATA Configuration
for details.
MIX-Q370D1
MIX-Q370D1 Fan connectors
CHA_FAN1
PWM
SENSE
VCC GND
CPU_FAN1
PWM
SENSE
VCC GND
MIX-Q370D1
MIX-Q370D1 SATA 6.0Gb/s connectors
SATA6G_2
GND RSATA_RXP2 RSATA_RXN2 GND RSATA_TXN2 RSATA_TXP2 GND
SATA6G_1
GND RSATA_RXP1 RSATA_RXN1 GND RSATA_TXN1 RSATA_TXP1 GND
SATA6G_4
GND RSATA_RXP4 RSATA_RXN4 GND RSATA_TXN4 RSATA_TXP4 GND
SATA6G_3
GND RSATA_RXP3 RSATA_RXN3 GND RSATA_TXN3 RSATA_TXP3 GND