2-19
Chapter 2: Motherboard information
5. Chassis intrusion connector (4-1 pin CHASSIS)
This connector is for a chassis-mounted intrusion detection sensor or switch.
Connect one end of the chassis intrusion sensor or switch cable to this
connector. The chassis intrusion sensor or switch sends a high-level signal to
this connector when a chassis component is removed or replaced. The signal
is then generated as a chassis intrusion event.
By default, the pins labeled “Intruder” are shorted with a jumper cap. Remove
the jumper caps only when you intend to use the chassis intrusion detection
feature.
6. Digital I/0 connector (10-pin DIO)
This connector includes 8 I/O lines (In/Out programmable). All of the Digital
I/O lines are programmable and each I/O pin can be individually programmed
to support various devices.
NOTE:
To configure the I/O pins in BIOS, go to the
Advanced
tab >
Digital
IO Port Configuration
. See section
3.3.9 Digital IO Port Configuration
for
details.
MIX-H310D1
MIX-H310D1
Chassis intrusion connector
Intrudor
Intrudor
No Intrudor
PIN1
CHASSIS
MIX-H310D1
MIX-H310D1
DIO connector
PIN 1
DIO
DIO_I#1 DIO_P#3 DIO_O#1 DIO_O#3
+5V
DIO_I#2 DIO_I#4 DIO_O#2 DIO_O#4 GND
Содержание MIX-H310D1
