MB-668
8
MB-668 Installation Guide
BC-599/596
LCD Panel Voltage Setting (JP6)
The LCD panel driving voltage is set by using JP6 jumper settings
illustrated as follows:
5V
*
3.3V
1 2 3 1 2 3
* Default
LCD Clock Signal Selection (JP7)
The LCD clock control signal is set by using JP7 jumper settings
illustrated as follows:
AShift Clock * Shift Clock
1 2 3 1 2 3
* Default
Ethernet Tx/Rx/Link LED Connector (JP8)
With ethernet Tx/Rx/Link LED indicator, the ethernet status can be
trace up through LED indicator readings. The pin definitions are
listed as follows:
Pin Signal Pin Signal
1 Rx-LED 2 Vcc
3 Link LED 4 Vcc
5 Tx-LED 6 Vcc
