background image

2

Gene-5310  User Manual

Introduction

The GENE-5310 is an all-in-one Tillamook MMX processor based
single board computer (SBC) with a audio controller,  PCI Flat Panel
controller,  dual 10/100Base-T Ethernet interface and  PC/104
expansion capability.  This compact (only 5.75"“ x 4") unit offers all
the functions of a single board computer, but still fits in the space
of a FDD drive.

Onboard features include two serial ports (one RS-232, one RS-232/
422/485), one multi-mode parallel (ECP/EPP/SPP) port, pin header
for two USB (Universal Serial Bus) ports, a floppy drive controller,
and a keyboard/PS/2 mouse interface. The built-in high speed PCI
IDE controller supports Ultra DMA/33 mode. Up to two IDE
devices can be connected, including large hard disks, CD-ROM
drives, and tape backup drives, etc.

The GENE-5310 also features power management to minimize power
consumption. It complies with the APM standard and supports
three types of power saving features: Doze mode, Standby mode,
and Suspend mode. In addition, the board's watchdog timer can be
programmed to reset the system or generate an interrupt in case the
system  stops due to a program bug or SMI.

Highly integrated multi-media SBC

The GENE-5310 is a highly integrated multi-media SBC that com-
bines audio, video, and network functions on a FDD drive size
single computer board.  It provides an AC-97 audio interface 2.0
version and up to 1024 x 768 resolution @ 16M colors with UMA
8MB SDRAM display memory. Major onboard devices adopt PCI
technology to achieve outstanding computing performance when
used with Tillamook MMX level processors, making the GENE-5310
one of the world's smallest and most powerful all-in-one multimedia
boards.

Содержание Gene-5310
































































































Отзывы: