manualshive.com logo in svg

Aaeon ECM-5716 Series, Руководство пользователя, Страница: 65 / 131

Поделиться
Скачать
Aaeon ECM-5716 Series Скачать руководство пользователя страница 65

User’s Manual 

52 

  ECM-5716 Series User’s Manual

 

 

 

4.5.3.16  Small Logo (EPA) Show 

This item allows you enabled/disabled the small EPA logo show on screen at the POST 
step,  

Enabled 

EPA Logo show is enabled 

Disabled  EPA Logo show is disabled 

4.5.4  Advanced Chipset Features 

This section allows you to configure the system based on the specific features of the 
installed chipset. This chipset manages bus speeds and access to system memory 
resources, such as DRAM and the external cache. It also coordinates communications 
between the conventional ISA bus and the PCI bus. It must be stated that these items 
should never need to be altered. The default settings have been chosen because they 
provide the best operating conditions for your system. The only time you might consider 
making any changes would be if you discovered that data was being lost while using your 
system. 

The first chipset settings deal with CPU access to dynamic random access memory 
(DRAM). The default timings have been carefully chosen and should only be altered if 
data is being lost. Such a scenario might well occur if your system had mixed speed 
DRAM chips installed so that greater delays may be required to preserve the integrity of 
the data held in the slower memory chips. 

4.5.4.1  DRAM Timing Selectable  

This item allows you to select the DRAM timing value by SPD data or Manual by yourself. 
The choice: Manual, By SPD. 

4.5.4.2  System BIOS Cacheable 

This feature is only valid when the system BIOS is shadowed. It enables or disables the 
caching of the system BIOS ROM at 

F0000h-FFFFFh

 via the L2 cache. This greatly 

speeds up accesses to the system BIOS. However, this does 

not

 translate into better 

system performance because the OS does not need to access the system BIOS much. 

The Choice: Disabled,Enabled. 

4.5.4.3  Video BIOS Cacheable 

This feature is only valid when the video BIOS is shadowed. It enables or disables the 
caching of the video BIOS ROM at 

C0000h-C7FFFh

 via the L2 cache. This greatly 

speeds up accesses to the video BIOS. However, this does 

not

 translate into better 

system performance because the OS bypasses the BIOS using the graphics driver to 
access the video card's hardware directly. 

The Choice: Enabled, Disabled. 

Содержание ECM-5716 Series




































































































































Отзывы:

Нет отзывов