manualshive.com logo in svg

Aaeon ECM-5716 Series, Руководство пользователя, Страница: 14 / 131

Поделиться
Скачать
Aaeon ECM-5716 Series Скачать руководство пользователя страница 14

ECM-5716 Series  

ECM-5716 Series User’s Manual  

1 

                                        

 

1.  Manual Objectives 

 

This manual describes in detail the Evalue Technology ECM-5716 series Single Board. 

We have tried to include  as much information as possible but we have not duplicated 
information that is provided in the standard IBM Technical References, unless it proved to 
be necessary to aid in the understanding of this board. 

We strongly recommend that you study this manual carefully before attempting to 
interface with  ECM-5716 series or change the standard configurations. Whilst all the 
necessary information is available in this manual we would recommend that unless you 
are confident, you contact your supplier for guidance. 

Please be aware that it is possible to create configurations within the CMOS RAM that 
make booting impossible. If this should happen, clear the CMOS settings, (see the 
description of the Jumper Settings for details). 

If you have any suggestions or find any errors concerning this manual and want to inform 
us of these, please contact our Customer Service department with the relevant details. 

 
 
 
 

Содержание ECM-5716 Series




































































































































Отзывы:

Нет отзывов