Aaeon ATX-Q370A, Руководство пользователя

Страница: 22 / 53

ATX-Q370A
2-14
4. Chassis intrusion connector (4-1 pin CHASSIS)
This connector is for a chassis-mounted intrusion detection sensor or switch.
Connect one end of the chassis intrusion sensor or switch cable to this
connector. The chassis intrusion sensor or switch sends a high-level signal to
this connector when a chassis component is removed or replaced. The signal
is then generated as a chassis intrusion event.
By default, the pin labeled “Chassis Signal” and “Ground” are shorted with
a jumper cap. Remove the jumper caps only when you intend to use the
chassis intrusion detection feature.
ATX-Q370A
ATX-Q370A Chassis intrusion connector
+5VSB_MB Chassis Signal GND
CHASSIS
ATX-Q370A
ATX-Q370A COM1 Ring/+5V/+12V Selection
COM1_V1
1 2 3 4 5 6
+12V +5V Ring
(Default)
5. COM1 Ring/+5V/+12V selector (6-pin COM1_V1)
Setting Pins
+12V 1-2
+5V 3-4
Ring (Default) 5-6