background image

18 

 

Limited   Warranty   

 

 

AADYN TECHNOLOGY, LLC 

LIMITED WARRANTY 

 
 

AAdyn Technology, LLC (“AAdynTech”) products are covered by a limited warranty against 

manufacturing  defects  for  two  (2)  years  from  the  date  of  purchase  by  the  original  purchaser.  
AAdynTech’s liability is limited, at AadynTech’s option, to repair or replacement of the product with 
the  same  or  an  equivalent  product  and  does  not  include  installation  costs,  removal  costs,  or 
transportation costs.  AAdynTech reserves the right to determine whether the AAdynTech product is 
defective. Damage due to normal wear and tear, incorrect installation, misuse, abuse, accident, or any 
cause  other  than  a  manufacturing  defect  is  not  covered  by  the  warranty.    AAdynTech  disclaims  any 
liability  for  damage  to  products,  adapters,  other  property,  or  personal  injury  resulting  in  whole  or  in 
part, from improper installation or use of its products. Components not manufactured by AAdynTech 
are  subject  to  the  warranty  or  guarantee  set  forth  by  the  manufacturer  thereof,  and  then  only  to  the 
extent AAdynTech is able to enforce the warranty or guarantee.  

In  order  to  make  a  warranty  claim,  you  must  notify  AAdynTech  in  writing  within  sixty  (60) 

days  after  your  discovery  of  the  defect,  obtain  from  AAdynTech  an  RMA,  then  provide  proof  of 
purchase, such as the invoice, and promptly return the product to AAdynTech or its authorized service 
provider, freight prepaid.  

THE  FOREGOING  WARRANTY  PROVISIONS  ARE  EXCLUSIVE  AND  ARE  GIVEN 

AND  ACCEPTED  IN  LIEU  OF  ANY  AND  ALL  OTHER  WARRANTIES,  WHETHER  EXPRESS 
OR  IMPLIED,  INCLUDING  WITHOUT  LIMITATION  ANY  WARRANTY  AGAINST 
INFRINGEMENT  AND  ANY  IMPLIED  WARRANTIES  OF  MERCHANTABILITY  OR  FITNESS 
FOR A PARTICULAR PURPOSE. 

IN  NO  EVENT  SHALL  AADYNTECH  BE  LIABLE  FOR  INCIDENTAL, 

COMPENSATORY,  CONSEQUENTIAL,  DIRECT,  SPECIAL  OR  OTHER  DAMAGES.  
AADYNTECH’S  AGGREGATE  LIABILITY  WITH  RESPECT  TO  A  DEFECTIVE  PRODUCT 
SHALL  IN  ANY  EVENT  BE  LIMITED  TO  THE  REPAIR  OR  REPLACEMENT  OF  THAT 
DEFECTIVE  PRODUCT  OR,  AT  AADYNTECH’S  OPTION,  THE  REIMBURSEMENT  OF  THE 
PURCHASE PRICE THEREFOR.  

This warranty is effective for purchases of AAdynTech’s product on or after the effective date 

set  forth  below.    AAdynTech  reserves  the  right  to  modify  this  warranty  from  time  to  time.    Any 
modification of this warranty shall be effective for all orders placed with AAdynTech on or after the 
effective date of such revised warranty.  

 

Effective Date:   November 11, 2014  

All prices and specifications are subject to change without notice.   

 

Содержание Punch Series Light




















Отзывы: