AAdynTech Punch Series Light, Руководство пользователя

Страница: 13 / 19

13
•
The factory default for the UIM EFFECT FREQUENCY parameter shall be 75%.
•
The preset values shall be set as follows:
•
PRESET 1
! LIGHT CONTROL = UIM
! UIM BRIGHTNESS = 100%
! UIM FADE = 0%
!
UIM EFFECT SELECTION = NONE
! UIM EFFECT FREQUENCY = 0%
! DMX BASE ADDRESS = 1
! DMX CHANNEL MODE = 5
•
PRESET 2
! LIGHT CONTROL = UIM
!
UIM BRIGHTNESS = 45%
! UIM FADE = 0%
! UIM EFFECT SELECTION = NONE
! UIM EFFECT FREQUENCY = 0%
! DMX BASE ADDRESS = 1
!
DMX CHANNEL MODE = 5
•
PRESET 3
! LIGHT CONTROL = UIM
! UIM BRIGHTNESS = 25%
! UIM FADE = 0%
! UIM EFFECT SELECTION = NONE
! UIM EFFECT FREQUENCY = 0%
!
DMX BASE ADDRESS = 1
! DMX CHANNEL MODE = 5
•
The custom profile shall default to these settings:
o
LIGHT CONTROL = UIM
o
UIM BRIGHTNESS = 100%
o
UIM FADE = 0
o
UIM EFFECT SELECTION = NONE
o
UIM EFFECT FREQUENCY = 75%
o
DMX BASE ADDRESS = 1
o
DMX CHANNEL MODE = 5
•
The software shall implement medium, medium fast and fast scroll where noted. If the Right or Left
Arrow button is held down for one half second, the values shall be medium scrolled on the display. If the
Arrow button is held down for two seconds the values shall be medium fast scrolled on the display. If the
Arrow button is held down for six seconds the values shall be fast scrolled by five on the display.
•
The software shall power the LED’s based on UIM settings and any saved profile described under
POWER ON SETTING before detecting the presence of a UIM (User Interface Module).
•
If a UIM cannot be detected at light startup, the software shall transmit the AADYN TECHNOLOGY
splash screen and check again next time through the main loop. If a UIM is attached after startup, the
software shall display the UIM BRIGHTNESS screen.
•
If the UIM is removed after startup, the software shall maintain the current settings. If the UIM is
reattached later, the splash screen shall show again and any value in the buffer shall be processed.