Note:
Make sure your amplifier is off and disconnected from power while you are
connecting speakers to amplifier. Turn your amplifier on only after you check and
make sure speakers are properly connected.
Two Channel Stereo Application
Connections are made at the terminals located on the back of the loudspeaker
system. The terminals accept spade plugs, bare wire or banana plugs. For best
results, use high quality speaker cables.
All Silver Reference loudspeakers have 4 gold plated binding post for single or bi-
wring options.
Single Wiring
This method uses only one pair of cables to connect each speaker to the amplifier.
(see Fig. 1).
For each channel, the red terminal on the loudspeaker should be connected to the
red or (+) loudspeaker connection terminal on the receiver or amplifier. The black
terminal on the loudspeaker should be connected to the black or (-) loudspeaker
connection terminal on the receiver or amplifier. Connecting the loudspeakers in
this manner ensures that they will be in phase; that is work together rather than in
opposition. Connecting the loudspeakers out of phase will not damage them, but
will result in less bass and poor imaging.
CONNECTIONS
Amplifier or
Received
R
L
SPEAKER OUTPUT
R
L
+
_
+
_
-6-
