Metal base x 1
M10 *40 machined
screws (with spring
washers) x 1
Metal feet x 4
Disc x 4
Alan key x 1
Parts List for each base
BASE ASSEMBLING INSTRUCTIONS(Only for Silver-5 & Silver-7)
Step 1
Step 2
Step 3
Step 5
Step 6
-4-
Step 4
Step 1: Stand speaker upside down, with protective
foams on both ends. Now remove the foam
piece, exposing bottom of speaker.
Step 3:
Place metal base on top of rotation disc with wide
side in the front; align center holes on metal base
with center hole on rotation disc.
(Handle metal base with caution as it is heavy
and can cause bodily injury or damage to other
objects if dropped.)
Step 4:
Insert the enclosed M10*40 machined screws (with
spring washers) into the center holes. Lock tight
with Alan key provided, ensuring the metal base is
firmly affixed to the cabinet.
Step 5:
Thread in the 4 metal feet as shown in diagram
Step 6:
Now stand speaker right side up. To protect wood
floors, please use small protective disc under each
metal feet. Remove packing foam from the top and
adjust each metal feet to make sure speaker stands
leveled.
Step 2: Place rotation disc on bottom of speaker, align
the two center hole on disc and on speaker.
Rotation disc x 1
