S
TEP 3
Remove the two factory bolts(Fig1), (if equipped), along the side panel find the SECOND SET of the threaded holes to mount
the center Bracket, and the very last two factory bolts, (if equipped), along the side panel to mount the rear Bracket. Partially
attach center and rear Brackets to the vehicle with
Hex Head Bolt M8
, Spring Washers M8 and Washers M8(Fig2).
Repeat procedure for other side.
Complete your installation. Enjoy!
S
TEP 4
Now install Step Rail on the brackets. Place the Step Rail on the installed mounting brackets.
Align the holes of Step Rail with the holes on the brackets and drop them into place. Next thread the provided Hex Head Bolt
(
M10
)
& washer
(
M10
)
& Spring washer (M10
)
to hold the Step Rail and leave loose. Adjust the Step Rail in place to your
liking, tighten all fasteners on the brackets. Front and rear first and then the center brackets finally the Step Rail.
H
ex Hea Bolt(M10)
&
Spring
Washer(M10)
&
Washer(M10)
BRACKET
R
emove two
factory bolts
FIG1
FIG2
H
ex Hea Bolt(M8)
&
Spring
Washer(M8)
&
Washer(M8)
B
RACKET FACING
REAR OF VEHICLE
I
NSTRUCTION MANUAL
AAPRODUCTS INC.
F
or Technical Support Call:1-888-806- 3972 / 626-332-4245
