Need Help?
a3smarthome.com/install
(877) 998-1457
[email protected]
Next
Now that your panel is powered up, it's time to install your door and window sensors.
3
Setting Up Your Control Panel
Follow these steps to plug in and power up your panel.
Using a screwdriver, carefully
remove the existing screw from
your chosen outlet.
Take your power supply, which is
already wired into your panel, and
remove the green adhesive cover
from its outlet plug.
Plug your power supply into your
chosen outlet.
Secure your power supply plug
in the outlet by taking the longer
screw from your package, and
carefully twisting it through the
hole in the power clip.
Take your panel, and push and hold
the standby button on the side for
3 seconds to power it up.
Attach your table stand into the
back when you’re ready to place
your panel.
1
4
2
5
3
6
