Need Help?
a3smarthome.com/install
(877) 998-1457
[email protected]
Next
9
See how to mount your smoke and heat detector.
Installing Your Smoke and
Heat Detector
Installation parts:
•
Round faceplate, which holds your detector
•
Flat backplate for mounting to surface
•
2 screws to secure the backplate
•
3 AAA batteries
Insert batteries.
Open the back of your smoke and heat detector, and
insert the provided batteries. Insert the “-” end first,
then push the “+” end down.
The detector should chirp once after all batteries are
properly inserted.
Test your smoke detector.
Press and hold the button on your smoke and heat
detector for 3 seconds.
1
When you hear the smoke detector beep 2 times,
hold for 3 seconds more, then release the button.
2
3
Watch the light flash red at first and then
go to green.
4
Once the test is done, hold the test button down
again until you hear 2 beeps and let go.
