A2Z Drone Delivery RDS2, Руководство пользователя

Страница: 14 / 44

14
UNPACKING AND HARDWARE INSTALLATION
10.
Position the RDS2 on the mounting rails so that the CG of the drone is lined up with the hook/tether of the
RDS2. There may be space on either side of the RDS2 case and the rail clamps. You will still need to use spacers
to correctly position the RDS2 on the rails. You can make these spacers by utilizing the proper diameter tubing,
using a 3D printer, or you can use off-the-shelf 12mm tube clamps. The spacers will also prevent the RDS2 from
sliding during operation.
3D Printed spacers
11.
After positioning the RDS2 correctly on the rails and installing spacers, tighten the rail clamp screws in order
to prevent the rails from sliding during operation.
If something is installed incorrectly, follow this diagram for the correct order
Front Rear
Side Profile
INSTALLATION DIAGRAM
Drone Mounting Clamps
RDS2 Mount
Spacer
Spacer


RDS2