11
This section describes how to make a first time installation for PC following
the step by step instructions below. See to that the control software files delivered
on the CD-ROM are installed on your PC.
Connect the module (EFTA1-T2 or ETA-100) to a DC power supply (the ESP-100
or EPP-100). Connect your PC to the module with a null modem cable from a serial
port on the PC to the RS-232 port on the module. Choose the correct COM port
and press [OK] and following menu should appear.
Note! The CA Settings marked with a dashed rectangle will only appear for the ETA-100.
5. Settings with PC
English
