manualshive.com logo in svg

a2b 2014 Kuo, Руководство пользователя, Страница: 12 / 36

Поделиться
Скачать
a2b 2014 Kuo Скачать руководство пользователя страница 12

12

Owner`s manual

6.0 Getting to know your A2B Kuo+

Do you fully understand how to use your A2B Kuo+? If not, before 
your first ride, ask your A2B dealer to explain any functions or 
features that you do not understand.

6.1 Starting and stopping

1.  Choose a quiet area away from cars, other cyclists, obstacles or 

other hazards.

2.  Ensure that the power is OFF and raise the kickstand into the 

riding position.

 Mounting the bike with the power ON may result in activating 

the pedal operated torque sensor and the bike may surge forward, 
potentially resulting in serious injury or death and property damage. 
For the same reason, turn the power OFF before dismounting.

 DO NOT sit on the bike whilst it is supported by the kickstand, 

you will damage the kickstand and possibly the frame.

3.  Mount your bike and get comfortable.
4.  Turn the battery power ON.
5.  Select the low setting on the power control module (S).
6.  Gently pedal and away you go - assisted by the intelligently 

delivered A2B power hub.

7.  Test the brakes at slow speed. Left lever actuates the rear brake 

and the right lever actuates the front brake for the UK, Australia 
and New Zealand. For all other countries the reverse applies. Put 
your weight forward and gently apply the brakes, rear brake first.

8.  Check out the handling and response of your A2B Kuo+.

Sudden or excessive application of the front brake could throw you 
over the handlebars. Applying brakes too hard can lock up a wheel, 
which could cause you to lose control.

No power? 

Here are some solutions. If they DO NOT solve your 

problem ask your A2B dealer for help.

Problem 

Possible Cause

s

Solution

The bike does not 
turn on.

Dead battery.

Recharge battery 
See sections 7.2 
and 7.3.

The bike turns on, 
but the motor does 
not run (state of 
charge indicator 
LED’s Illuminate).
 

1. A brake lever is 
applied.

Do not apply the 
brakes when starting. 
Make sure brake  
levers are fully forward.

2. The motor 
power connector 
is unplugged.

Ensure motor power 
connector is securely 
connected.

Содержание 2014 Kuo





































Отзывы:

Нет отзывов