A2B Electronics MyM Pro T2, Руководство по установке

Страница: 9 / 20

99
English
5.2 Input settings
As the MyM Pro T2 contains
”multituner” start by
selecting either DVB-T/T2 or
DVB-s/S2. After that you
choose [Tuner 1] or [Tuner
2] for settings of the tuner
parameters.
Tuner 1 provides the service
list for RF output Ch1 and
Ch2. Tuner 2 provides the
service list for RF output
Ch3.
[Bandwidth] can be
selected between 6, 7 or 8
MHz. Select input channel
from [Channel name] scroll
list or write the center
frequency of the wanted Mux
and press [Set].
If you have an MyM Pro 6T
proceed with next two tuners
[Tuner 3] and [Tuner 4]
after moving the TP cable to
the other RJ 45 port (if not
using switch). Tuner 3
provides the service list for
RF output Ch4 and Ch5.
Tuner 4 provides the service
list for RF output Ch6.
NOTE! Don’t press [Set] if
channel is chosen from
the scroll list.
5 Menus and settings (continued)