A2B Electronics MyM Pro T2, Руководство по установке

Страница: 5 / 20

55
English
1. Antenna input 1 Connect the satellite/terrestrial signal for Ch1 and Ch2
here
2. Antenna input 2 Connect the satellite/terrestrial signal for Ch3 here
3. Common Interface 1 Insert a Common Interface module into this slot
(Supports decryption for Channel 1 and 2)
4. Common Interface 2 Insert a Common Interface module into this slot
(Supports decryption for Channel 3)
5. Common Interface 3 Insert a Common Interface module into this slot
(Supports decryption for Channel 4 and 5)
6. Common Interface 4 Insert a Common Interface module into this slot
(Supports decryption for Channel 6)
7 and 8. Ethernet ports RJ-45 port for 10/100 baseT Ethernet. Connect your
PC to these ports for management and upgrades.
9. RF-output(s) Combined 3 channel RF outputs for connection to
your SMATV network.
10. Indicator LED(s) Status indicator. Green flashing LED says all channels
are OK.
Red flashing LED says one or more channels are not
decoding video.
NOTE!If only two channels are used the Video WD
shall be set to ”OFF”for the non used channel to
get green LED (see page 12)
1
2
3
4
5
7
9
3 Connections and indications
6
8
10