User manual MyM DVB-3T , rev B eng
Page 5
7
Installation Part two
7.1
Connection to one TV
If you only want to connect one TV, or one TV combined with a VCR / PVR, the
most straight-forward installation is to mount the MyM on the wall close to the TV.
1. Connect the aerial cable to the aerial
input on the MyM
2
Connect the one end of a RF cable to
the RF output on the MyM, and connect
the other end to the aerial in socket on
your TV.
3
Connect the power adaptor (only use
the adaptor delivered with the MyM).
4
The MyM will now start an automatic
channel search. When the channel
search is finished the LED on the MyM
will turn green and you will need to do
a channel search on your TV set. See
Chapter 7.3 Automatic installation and
channel search, for more information.
Note! Do not use any other the power adaptor than the original one with the MyM.
7.2 Connection to a Cable network
The MyM should be connected close to the aerial, before the signals are split to the
cable network.
If there is an amplifier connected to the
splitter you should first try to install
the MyM without the amplifier, because
the MyM has an embedded amplifier.
If there are very long cables in the
cable network, an amplifier can be
needed and should then be connected
after the MyM.
1
2
3
Splitter
MyM
TV
TV
TV
TV
