User manual MyM DVB-3T , rev B eng
Page 12
8.2.7 Loopthrough
In this menu you can choose whether you want the
antenna signals to pass through the MyM. If you select
mode "On" then the FM, VHF and UHF band to be
imported and thus these signals will be available in the
antenna network after the MyM. Appropriate to put in
the "On" mode if the MyM is connected to a network with
digital TV boxes or TV sets with built-in digital receiver.
8.2.8 CI 1 and CI 2
The CI 1 and CI 2 menus gives you the possibility to get
information about CAM and Smartcard. CAM Interface 1
(CI 1) is used for decryption of services that is selected
for Output channel 1 and 2. CAM Interface 2 (CI 2) is used
for decryption of one service for Output channel 3.
9
Multiple installation
9.1 Installation of multiple MyM’s
You can link MyM’s to view more programs on all your TVs. The maximum number
of MyM’s you can cascade is 4. The limit is set by the S/N value that has to be
above a certain level to give a good picture quality.
To link 2 MyM’s:
•
Install the first MyM
•
Do a channel search on
the TV
•
Change output channels in the
MyM no 1.
•
Link the MyMs with a cable from
“Ant 2” connection on the first
MyM to “Ant 1” connection on the
second MyM. Connect the output
of the two MyM’s with a combiner
(see picture).
•
Power up and install the second MyM
•
Do another channel search on the TV and find the MyM channel one for each
MyM. Please remember that you can’t use neighboring output channels, not
even if they are on different MyM’s.
MyM #1
MyM #2
