8
English
7. The video OSD output (On Screen Display) can be set to indicate “P1” to
“P7” in the upper right corner on TV sets connected via an RF modulator (as
the EVA-200 or EVA-210). If you select “Black” the screen will be blank. This
function can be used when the EFM-100 is installed in a hotel system. The
OSD output can also be disabled. Do the settings you want and click
[ Next ].
8. The settings will be stored automatically when entered, and you should now
have the signal(s) out from the EFM-100 according to the settings you have
made. Click
[ Next ]
and your setup is completed. Click
[ Again ]
if you want
to change some settings. If you want to connect your Palm to another E-series
module you first click
[ Again ]
and then you click
[ Exit ].
Disconnect the PALM
from the EFM-100
and the installation is ready.
It is possible to change from Stereo to Mono Mode if wanted. You can also
attenuate the incoming LF signal (from phono left and right) by 9dB if
necessary. The RDS Name box allows you to send your own RDS info with up
to 8 letters. Leaving the RDS Name field blank disable the RDS transmission.
The preemphasis is setted to 75 µsec as default but can be changed to 50 µsec
or can be set to Disabled.
NOTE!
75 µsec shall be used for all normal purposes.
Perform desired settings and click
[ OK ]
