6
This section describes how to make a quick installation following the step by step
instructions below. See to that the control software files delivered on the CD-
ROM are loaded into the PALM. For more information on how this is done,
please consult your PALM user manual.
1. Connect the EFM-100 to a DC power supply (the ESP-100 or EPP-100). Then
connect your PALM PDA to the EFM-100 with a PALM Hotsync cable to the
RS-232 serial port on the front of EFM-100.
2. Tap the EFM icon in the A2B Control menu of the PALM.
3. A Welcome menu should appear if your PALM is in contact with the EFM-
100. Click
[Next]
.
4. Settings with PALM PDA
English
