A2B Electronics ECX-200 Скачать руководство пользователя страница 3

Страница: 3 / 24

1. Introduction

Thank you for purchasing an A2B Electronics product. The ECX-200 is

a revolutionary solution for reception and modification of QAM

transmitted TV-content into various transmission formats for cable-

TV and SMATV.

The ECX-200 is delivered with hardware and software that supports

DVB-T reception, MPEG2/MPEG4 H.264 AVC, ASI output, VSB RF

modulation with NICAM audio, IP control and management. All

hardware needed for upgrade with software options is available from

the start. See section 7 for more information.

ECX-200 can be upgraded for enhanced functionality and various

formats for transmission and processing of digital-TV content by

upgrade of its firmware. Software options will be available from A2B

Electronics, please ask us for the specifications and complete price

list of all options.

A2B Electronics AB

Phone: +46 (0)141 229115

E-mail:

[email protected]

Also visit our web site

www.a2b.se

for further support.

English

Содержание ECX-200

























Результаты поиска

Содержание ECX-200

Отзывы:

Бренды по названию

Популярные бренды

A2B Electronics ECX-200, Руководство по установке

Результаты поиска

Содержание ECX-200

Отзывы:

Бренды по названию

Популярные бренды