The sensor may be burned out by a laser
beam, so when any laser equipment is being
used, make sure that the surface of the
sensor not be exposed to the laser beam.
While shipping, the camera should be packed
in its original packing.
Maintenance
If there is dust on the front glass surface,
remove the dust gently using an oil-free
brush or a rubber dust blowing ball.
If there is grease or a dust stain on the front
glass surface, clean the glass surface gently
from the center outward using anti-static
gloves or an oil-free cloth. If the grease or
the stain still cannot be removed, use
anti-static gloves or an oil-free cloth dipped
with detergent and clean the glass surface
gently until it is removed.
Available from A1 Security Cameras
www.a1securitycameras.com email: [email protected]
