Digital Video Recorder User Manual
Chapter 11 Network Settings
11.1 Configuring General Settings
Purpose
Network settings must be properly configured before you operate DVR over network.
Step 1 Enter the Network Settings interface.
Menu > Configuration > Network
Figure 11-1 Network Settings Interface
Step 2 Select the
General
tab.
Step 3 On the
General Settings
interface, you can configure the following parameters: NIC Type,
IPv4 Address, IPv4 Gateway, MTU, DNS Server and Main NIC.
The valid value of MTU is from 500 to 1500.
If the DHCP server is available, you can check the checkbox of
Enable DHCP
to
automatically obtain an IP address and other network settings from that server.
If DHCP is enabled, you can check the checkbox of
Enable DNS DHCP
or uncheck it and edit
the
Preferred DNS Server
and
Alternate DNS Server
.
Step 4 After having configured the general settings, click the
Apply
button to save the settings.
11.2 Configuring Advanced Settings
11.2.1 Configuring PPPoE Settings
Purpose
The DVR also allows access by Point-to-Point Protocol over Ethernet (PPPoE).
143
Available from A1 Security Cameras
www.a1securitycameras.com email: [email protected]
