The parts listed below are important for proper air-tightness. Therefore, repairs and replacement parts
should be repaired by a1-cbiss if required.
Repair of the flow finish indicator
A malfunctioning flow finish indicator may lead to air leaks in the sampling pump. If any abnormality is
found, please contact us.
Replacement of the head block
The file in the tube tip breaker can be used for up to 20,000 detector tubes. When it becomes
ineffective for breaking off tube tips, please contact us for a replacement head block.
Repair of the counter
When any abnormality is found with the counter, please contact us.
Never give a gastec precision pump any strong shock, otherwise a malfunction may result.
NOTE:
Do not modify the sampling pump. Tampering with the pump may invalidate warranty conditions.
Do not disassemble pump components such as head the block, back plate, flow finish indicator and
piston. If assembled incorrectly an air leak may result and this may also invalidate warranty
conditions.
Only use Gastec components for maintenance only. Use of other parts will invalidate warranty
conditions.
