operation manual
MPPT solar charge controller X45/10
If you have any questions, please do not hesitate to contact us!
a-TronlX MPPT solar charge controller X45/10
Item No. 9887579
panel parameters
battery parameters
Load
system parameters
page 16
02/2022
Verbindungsweg 23 25469 Halstenbek / Hamburg GERMANY
Telephone +49 4101 | 3 76 76-0 / [email protected] / www.akkusys.de
AKKU SYS Accumulator and Battery Technology North GmbH
0-30 min (programmable, default: 0 min)
(Default: Always On)
10m
Charging voltage
target 9.2–16.8V (programmable)
Day/Night Delay Time
ownconsumption
degree of protection
IP67
Maximum voltage at the PV connection
(battery voltage +1.0V) -Voc*0.9 *1
Maximum charge conversion
ambient temperature
lithium
45V
output current
8mA
4,000m
Turn on low voltage again 9.6–16.0V (programmable)
Maximum tracking efficiency
96.50%
Always on, Dusk, Five levels, Manual
0-100%RH
communication distance
ambient humidity
Restore charge voltage Turn off
lithium low voltage 9.0–15.0V (programmable)
size
Maximum input power
10A
MPPT tracking area
working mode
Weight
Maximum height
10.0–17.0V (programmable)
Dusk/twilight detection in V
>99.9%
*2 VOC is the open circuit voltage of the solar panel.
3.0~8.0V (default: 5.0V)
85.8*81*23.1mm
260g -35~+60°C
*1 The VOC of the solar panel must not exceed this value, otherwise the controller will be damaged.
Yes, No, Slow (Lithium, Default: Yes) 0°C
Load protection
130W
Machine Translated by Google
