operation manual
MPPT solar charge controller X45/10
Overtemperature The controller cuts off the load when the temperature reaches the set value.
14.0-14.8V (programmable, default: 14.8V@25°C)
11.4~12.8V (programmable, default: 12V)
14.0-14.8V (programmable, default: 14.5V@25°C)
13.0-14.5V (programmable, default: 13.7V@25°C)
10.8-11.8V, SOC1-5 (programmable, default: 12V)
12. Security Features
13. Specifications
02/2022
page 15
Switch off
AGM
overcurrent
–
<14.5V 25
Wet,
Switches off with a delay
–
*2 The battery must be protected by a fuse.
25V
Protected
undervoltage
–
Max charge current
-4.17mV/K per cell (boost, equalization), -3.33mV/
K per cell (float)
Protected
Protected
–
MPPT charge voltage
and
Lithium, Wet, Gel, AGM (Default: Gel)
15.5V
Protected *1
countercurrent
Turns off immediately
–
*1 Controller can protect itself, but the load might be damaged.
12V
Max. 25V
Mains voltage
Max. voltage at battery terminal Battery
type
short circuit
–
Protected *2
–
10A
gel
Protected *1
a-TronlX MPPT solar charge controller X45/10
status
Item No. 9887579
battery parameters
cause
ATTENTION:
The combination of different error states can lead to damage to the controller. Always
troubleshoot first before reconnecting the controller.
remedy
mistake
Machine Translated by Google
Voltage boost
Equalize voltage
Float Voltage Low.
Disconnect Power on again
Temperature compensation
Overvoltage Max. 45V
