58
CAUTION
:
If you forgot your password, you must disable
the CMOS by turning power off and set JP 8 to ‘close‘. And then
open reload the system.
IDE HDD AUTO DETECTION
This allows you to detect the IDE hard disk drivers‘ parameters
and enter them into ‘Standard CMOS Setup’ automatically.
If the auto-detected parameters displayed do not
match the ones that should be used for your hard drive,
do not accept them. Press <N> to reject the values
and enter the correct ones manually on the Standard
CMOS Setup screen.
SAVE & EXIT SETUP
This allows you to save the new setting values in the
CMOS memory and continue with the booting process.
Select what you want to do, press <Enter>.
EXIT WITHOUT SAVING
This allows you to exit the BIOS setup utility without
recording any new values or changing old ones.
