3
HARDWARE
Each ATC-6510 mainboard supports or contains the following components:
!
INTEL Pentium II CPU operating from 233MHz up to 333MHz.
!
INTEL Celeron
TM
CPU operating from 266MHz up to 333MHz.
!
INTEL 440EX PCIset.
!
ATI AGP Rage IIC 3D VGA chipset.
!
Yamaha 719/715 IIC 3D stereo sound PnP chipset, optional for ATI AGP Rage
Pro 3D.
!
Using two 168-pin DIMM sockets, provides two banks of 64-bit wide path up to
256MB SDRAM or 256 EDO DRAM (with parity chip ECC support).
!
Built-in Switching Voltage Regulator.(VRM 8.2 SPEC.)
!
INTEL LDCM software.(option)
!
Supports auto-detect CPU core voltage range 1.8V to 3.5V.
!
Supports one AGP slot, three PCI slots with revision 2.1 interface compliant and
one 16-bit ISA slot.
!
Dual Master IDE connectors support Ultra DMA/33, up to four devices in two
channels for connecting of high capacity hard drive, CD-ROM disk drive, tape
backup etc..
!
Supports the USB (Universal Serial Bus) connector.
!
PS/2 keyboard connector and PS/2 mouse connector.
!
Winbond 83977 high-speed Ultra Multi-I/O chipset.
!
Supports Infrared transfer (IrDA TX/RX) connection.
!
One FDC port supports two devices up to 2.88MB.
!
Two 16550A fast UARTs compatible serial ports.
!
One EPP/ECP mode parallel printer port.
!
Built-in Hardware Health Monitoring. (option)
!
Built-in SGRAM optional for 2MB, 4MB, 8MB; default value is 4MB.
!
Hardware Dimension is 244mm x 244mm. (9.6" x 9.6")
INSIDE THE ATC-6510 MAINBOARD PACKAGE
