6253M Mainboard Chapter 3 Award BIOS Setup
IrDA, and ASKIR. If you choose IrDA or ASKIR mode, the screen will show another
two lines to let you choose ‘RxD TxD Active’ (Hi Lo; Lo Hi; Hi Hi; Lo Lo), and ‘IR
Transmission Delay’ (Enabled/Disabled).
On Board Parallel Port
Let user select IRQ for parallel port When Disabled, the
parallel port will be disabled.
On Board Parallel Mode
Let user select parallel port protocol. This item is not
recommended to change except user has special request.
ECP Mode Use DMA
Select a DMA channel for the port. Choices are 3, 1.
EPP Mode Select
Let user select EPP version.
PWRON After PWR-Fail
When Last State, this allows you to set whether you want
your system to boot up after the power has been interrupted. “Always Off” leaves
your system off after reapplying power.
