a-them mrx 1120/720, Руководство по эксплуатации

Страница: 31 / 66

23
3.5
INPUT SETUP
Inputs and listening mode presets are configured in this section. From the factory, 5
inputs are set but you may change this to anything from 1 to 30 configurations.
To add an input at the end of the list, highlight Add Input and press Select.
To insert an input, highlight one on the list and press Input. The new input will be
inserted after the highlighted one.
To delete an input, highlight it and press Clear on the remote control.
ZONE 2 INPUT FOLLOWS MAIN
When changed to Yes, any input can go to Zone 2 without separate cabling from the
source, but the Zone 2 will always play whichever input is selected in the main zone.
Multichannel sources get downmixed to 2-channel so all sounds can go to Zone 2.
These settings are displayed for each configuration:
Input Setup
HDMI 1
HDMI 2
HDMI 3
FM
Play-Fi
Add Input
Zone 2 Input Follows Main
No
HDMI 1 Input Setup
Input Name HDMI 1
Video Input HDMI 1
Audio Input HDMI
Zone 2 Input Analog 1
Process Analog Audio Input N/A
Speaker Profile Config 1
Anthem Room Correction N/A
Dolby Volume Off
Dolby Volume Leveler N/A
Mode Preset for Stereo Sources Last Used
Mode Preset for Multi-Ch Sources Last Used
Lip Sync 0 ms