4 USE RULES
Pag. 17 di 26
4
USE RULES
Before using the equipment, check the tightness of the pipes and the correctness of assembly and
connection by performing about ten preliminary operations.
When using the equipment, it is necessary to follow the instructions listed below:
1.
Observe the capacity limits of the equipment.
2.
Do not use the equipment when people or animals are within the range of action of the
forklift.
3.
Do not try to lift loads by clamping them between the two forks.
4.
Do not try to move loads sideways by sliding them on the ground.
5.
Do not exceed the maximum pressure value indicated on the identification plate.
6.
Operate the equipment from the driver's seat of the forklift by a single operator.
7.
Act gently on the translation control lever, avoiding water hammer as much as possible.
8.
Any operation relating to installation, use and maintenance must be performed by
specialized personnel equipped with appropriate equipment for the type of intervention to
be carried out.
9.
Carry out maintenance and / or repair operations with the forklift stopped and with the
hydraulic circuit not active, using suitable protective equipment (gloves, safety shoes, etc.).
10.
Operate the piston rods only when they are correctly mounted on the equipment;
Otherwise, the piston rods could be violently ejected by the oil pressure.
The considered acoustic pressure level is lower than 70 dB (A).
