A SYSTEMS AV800HD, Руководство пользователя, Страница: 37 / 80

35
AV800HD
English
Output Scaling
As to input scaling, you can manually adjust the output scaling by following the steps listed below.
Setup Conditions
The prerequisite conditions for output scaling adjustment are as followed.
●
Set joystick to output scale mode by pressing Scale/Size SEL button to “OUTPUT”.
●
Setup Menu is closed.
Output Scale Adjustment
1. Press Scale/Size “SEL” button until “OUTPUT” LED
indicator is lit; PGM screen will be replaced by Scaling
Adjustment Screen (See Scaling Adjustment Screen
section).
Note:
Scale size will automatically change to default
size when output scale is enabled.
2. Use the “SIZE” to adjust image size:
●
Clockwise: Increase size. Maximum up to 10X
of original image.
●
Counter Clockwise: Decrease size. Minimum up
to original image size.
3. Use the “POSITION” joystick to position the
viewing center location.
●
Over-scaled: Viewable area window can be
moved around the total image area.
4. Press “ENTER” to complete and exit the adjustment;
image of PGM output will now convert to modified effect
with PGM label border changed to red.
5. To cancel output scaling just hold down the ESC
button for 3 seconds during output scale adjustment
and the PGM label border will return to Black.
Output Scaling Adjustment
Output-Scale Completion
PGM PVW
CH1 CH2 CH3
CH7/A CH8/A
CH4
CH5
DSK
CH6
CH6 CH7/A
CH4
CH8/B
PGM
PGM
PVW
CH1 CH2 CH3
CH7/A CH8/A
CH4
CH5
DSK
CH6
CH6 CH7/A
CH4
CH8/B