04
05
www.asafe.com
2. Technical Specification - RackEye
ª
3. Regulatory and Compliance Information
Colour
Dimensions
Mass
(Weight)
Connection to
Smart-phone
Connection to
Gateway
Status
Indication
Operating
Conditions
Power
Installation
Height***
Height
Width
Depth
Alarm
Tamper
Low Battery
OK
Low
High
Low
High
EU
USA & Canada
Bluetooth Version
Frequency
Activity
Transmission Power
Range
Class
10 x LEDs
DECT ULE
Temperature
Frequency
Transmission Power
Device Check-in Frequency
Range
Humidity
Max.
Min.
Power Source
Runtime
Yellow / Black
190mm / 7.48in
44mm / 1.73in
35mm / 1.38in
0.193g / 6.80Oz
4.2
2.4GHz
During Setup & Reset
0dBm
<3 Metres / <10ft
3
(Digital Enhanced Cordless
Telecommunications) (Ultra Low Energy)
1.88 to 1.9 GHz
1.92 to 1.93 GHz
23.5dBm
30mins (Default) adjustment possible
100m to 200m*
Red
Amber/ Red
Amber
Green - Can be turned off
-20 Celsius / -4 Fahrenheit
40 Celsius / 104 Fahrenheit
20%
80%
2200mm
1800mm
2X AA Batteries
2 Years**
* Range will depend on variables such as building construction and items being stored.
** Based on a RackEye™ running normally at room temperature with no alerts over a two year period.
*** Note these are recommended for optimum sensing. Custom heights can be investigated if you have a specific
requirement.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired
operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
End users must follow the specific operating instructions for satisfying RF exposure compliance.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's
authority to operate the equipment
FCC warning statement:
Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and
maximum (or lesser) gain approved for the transmitter by Industry Canada.
To reduce potential radio interference to other users, the antenna type and its gain should be so chosen
that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful
communication.
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the
following two conditions: (1) this device may not cause interference, and (2) this device must accept any
interference, including interference that may cause undesired operation of the device.
