5
o
peratIon
of
the
mIxer
:
A
Place the tool in the bowl. Open the safety guard.
B
Note:
the bowl arms must be in the lowest position.
Place the bowl in the bowl arms. Check that the
bowl is pushed right back into the arms and that the
“centre ear” of the bowl arms are turning in towards
the mixer
(fig. 2)
. Place the mixer tool in the bayonet
shaft. The tap of the tool must be turned right into
the bayonet hole. Close the safety guard.
C
Press to lift the bowl
(fig. 3)
. The bowl will auto-
matically stop in the top position.
D
You can set the mixing time on the timer using
the
and
buttons or you can start the mixer
without setting a time. If you do not set a time, the
display will function as a clock that counts up. See
also
“Timer function”
on page 6.
E
Press
to start the mixer
(fig.3)
.
F
Press and
until you have reached the desired
speed. You can read the speed on the indicator on
the side of the mixer
(fig. 2)
. See also
“Recom-
mended max. speeds” (fig. 1)
.
G
During the mixing process the mixer can be paused
by pressing
. You can now lower the bowl or open
the safety guard. If you start the mixer again using
all the settings will be unchanged. If you start
the mixer using
the settings will be reset. See
also
“Pause function”
on page 6
.
H
When the mixing process is completed the mixer
is stopped by pressing
,
or by the timer going
into stop position. In both cases the tool’s speed is
automatically reduced to a minimum and it will then
stop completely.
I
When the tool has stopped the bowl can be lowered
by pressing
.
B
owl
lIftInG
and
speed
Control
:
The mixer’s control panel has two buttons:
and
,
which both have two functions
(fig.3)
:
•
Bowl up or speed up
•
Bowl down or speed down
The function of the buttons is determined by whether the
mixer is running or not:
•
If the mixer is not running, the buttons are used for
“bowl up” and “bowl down”.
•
If the mixer is running, the buttons are used for
“speed up” and “speed down”.
•
When the mixer stops at the end of a process and
the tool is still, the buttons are used for “bowl up”
and “bowl down”.
The bowl seen from
above
,
The “centre
ear” of the bowl is
facing the mixer.
”Centre
ear” of the
bowl
Speed indicator
Fig. 3 Bowl lifting and speed control
.
Bowl
up/down
Speed
up/down
Fig 2.
Start/Stop
Emergency stop
Bowl /
Speed
down
Timer/
display
Bowl /
Speed
up
Pause
Time
down
Time up
