background image

Notes

1.  

I

NTRODUCTION

 

The high pressure power-jet cleaner you have purchased is a 

technologically advanced product designed by one of the leading European 
manufactures of high-pressure pumps.  To obtain the best performance 
from your unit, read this booklet carefully and follow the instructions each 
time you use the cleaner.  We congratulate you on your choice and wish you 
successful operation.

* Read and understand these instructions before operating the cleaner. Pay 
particular attention to the safety symbols through out this manual. Failure 
to comply with these instructions may result in personal injury or property 
damage. DO NOT allow children to operate or play on or around this 
equipment.

* Plug the cleaner into a properly grounded 3-prong outlet. Improper 
grounding can result in electrical shock.

2.   S

AFETY

 R

ULES

2.1   

Safety “MUST NOTS”

2.1.1 

DO NOT use the cleaner with fl ammable or toxic liquids, 
or any products, which are not compatible with the correct 
operation of the cleaner.  EXPLOSION OR POISONNING 
HAZARD.

2.1.2 

DO NOT direct the water jet towards people or animals.  
INJURY HAZARD.

2.1.3 

DO NOT direct the water jet towards the unit itself, 
electrical parts or towards other electrical equipment.  
ELECTRICAL SHOCK HAZARD.

2.1.4 

DO NOT use the cleaner outdoors if raining.  SHORT CIRCUIT 
HAZARD.

2.1.5 

DO NOT allow children or incompetent persons to use the 
cleaner.  INJURY HAZARD.

2.1.6 

DO NOT touch the plug and/or socket with wet hands.  
ELECTRIC SHOCK HAZARD.

2.1.7 

DO NOT use the cleaner if the electrical cable is damaged.  
ELECTRIC SHOCK AND SHORT CIRCUIT HAZARD.

2.1.8 

DO NOT use the cleaner if the high-pressure hose or spray 
gun assembly is damaged.  EXPLOSION HAZARD.

2.1.9 

DO NOT jam or lock the spray gun trigger in the operating 
position.  ACCIDENT HAZARD.

2.1.10 

Check that the data plates are affi xed to the cleaner, if not, 
contact your dealer.  Cleaners without plates must NOT be 
used, as they are unidentifi able and potentially dangerous.  
ACCIDENT HAZARD.

Содержание AR767











Отзывы: